Water Blossoms™

Decorative, Portable Outdoor Showers

Fun for kids Easy assembly Decorative addition to your landscape Constructed with durable copper piping Powder coated to prevent rust Over 6 feet tall Attaches to a standard garden hose Additional garden faucet attached Refreshing spray creates cooling relief from the sweltering heat. Rinse away sand or gravel before it's tracked into your house or pool.

Assembly Instructions:

1. Insert washers into both ends of the flex tube (A).
2. Wrap the male end of the upper stem (B) with plumbing tape.
3. Insert the male end of the upper stem (B) into either end of the flex tube (A) and tighten with a wrench.  **Note: Wrap a cloth around the pipe before using the wrench to avoid scratching the paint when tightening all parts of the shower.**
4. Wrap the male end of the lower stem (C) with plumbing tape.
5. Insert the male end of the lower stem (C) into the female end of the upper stem (B) and tighten with a wrench.
6. Connect the flower head (E) to the other end of the flex tube (A) and tighten with a wrench.
7. Wrap the coil wire in a spiral around the entire length of the upper stem (B) and attach the decorative leaves (F) to the wire.
8. Insert the ground stake (D) into the ground at the desired location of the shower using a rubber mallet as to not distort the copper, and insert the pointed end of the lower stem (C) into the ground stake (D).
9. Insert a washer into the hose connector at the bottom of the lower stem (C) and attach a garden hose.
10. Gently bend the flex tube (A) to desired shape and enjoy.

Catalog